Roof access windows

Dimension

From 80 x 80cm to 80 x 150cm

Characteristics

  • A roof access window is an easy-to-install, yet reliable in use structure that provides safe access to the roof.

  • A roof access window is also daylighting a room in roofs over the top floor or over a staircase in multi-story buildings.

Technical description

Roof access window base:

  • Made of galvanized steel sheet with a thickness of min. 1.25mm (standard: straight or slanted base with a height of 150, 350, 500 and 750mm. The base should be insulated with a layer of mineral wool or polystyrene foam with a thickness of 40mm.

  • Made of PVC (straight base with a height of 200mm or slanted base with a height of 150 or 300mm). The base does not require insulation.

Clamping frame:

The bases have special cut-outs in the corners, which, after installation and machining of the base, allow free press-on installation of the so-called PVC "clamping" frame.

Tilting segment:

The tilting segment consists of a hinged frame and a cover. Cover is made of cellular polycarbonate, solid polycarbonate or acrylic. Choose from two color options: transparent or milky. The surface can take the shape of a convex, dome-shaped (from acrylic or solid polycarbonate) and flat (from cellular polycarbonate). The roof hatch made of cellular polycarbonate can appear in Broof(t1)/fire retardant classification.


The frame is made of PVC or aluminum profile. It is protected around the perimeter with gaskets, which prevents water from entering the rooflight.

Drive:

Opening roof access windows to access the roof is done manually. To reduce the force required to open the cover and increase user comfort, gas springs and a handle are used

Technical parameters

  • We make roof access windows in the range (80-150)x(80x150) cm

  • DL 750 - has a downward directed load resistance of up to 750N/m2

  • UL 1500 - has an upward load resistance of up to 1500N/m2

  • SB 300 - shows resistance to impact with a large soft body

  • 1.1-2.5W/m2K- the heat transfer coefficient for the entire product. The coefficient depends on the choice of cover and base

  • With a 21mm thick polycarbonate cover (2x10mm+ fire retardant fabric) and a 27mm thick polycarbonate cover (10+16mm + fire retardant fabric), the product qualifies as non fire spreading (fire retardant).

Additional option

  • Possibility of attaching anti-drop handles to the roof hatch

  • Possibility to paint the base from the inside in any RAL color